One note: 1- using kamikaze 7. Thanks for your help Regards, Carlos. Interesting, thanks for the update Carlos. I have same vague memories that sometimes some USB devices only work with one of them. Any thoughts on how I can get this to take the file? Here in South Africa, we constantly have problems with stolen copper and as such often have sites down!
The usbserial. I have learnt a lot, and built some interesting things. I followed the writeup of Simon. Then I had to change the usbserial. Now I get my fullspeed I got with the original Linksys firm. Now one question. I use a vodafone flat and I wish an auto connect. Has someone a solution? Just saw this site. I am interested to try this out. Just a few questions guys, so I can get my hands dirty on this later. I saw three flavors of this in Linksys site.
Can use this as hotspot once installed with OpenWRT? Hi ferdie. Actually, what IS the difference between those devices? The data sheets on the linksys looks just the same to me. It should work fine as a hotspot, but you may need additional software if you want to configure it for authentication. Such as Chili Hotspot.
However, keep in mind that a cheaper choice may be to buy a normal wireless router with a USB port. You can then buy a separate USB-based 3G modem. I built and image with the old card settings, that I loaded onto a new router, and installed the new card in that one.
And this from a not working one? Assasin, it looks as if there is some USB problem. Either your card has a broken USB chip, or there is a software error. Or just use logread on its own to see the most recent log messages. Thanks for the easy instructions, could you explain how to install the Telstra MF Card, is there anything special about installing different cards.
Hi Oussy. As long as the card simulates serial ports over USB, there is no difference between different card. So any card should work with OpenWRT. Hi Vanity. However it sounds as if your problem is a simple one such as the wrong pin, the wrong APN setting, or something similar. So double check all the settings for the 3G card in your router. I successfully followed this on my wrt54g3g but i now want to put it on my wrt54g3gv2 has 3 usb ports in addition to pcmcia.
It seems reluctant to accept any firmware i throw at it with modified headers to 3G2V. Does dropbear require any busybox configuration or any configuration to start on boot or once compiled and installed will it start automatically? The unit definately has a broadcom board because of the dedicated broadcom folders in the gpl code.
This looks good. I am using the franlkin u modem. I read something about acm capability. Is my modem affected by this? I am really interested in following up on this. Some advice is needed on the above mentioned modem thanks. The E gets connected to my computer via an USBport. Only one computer now have access to the internet. Hi all. In Australia, our Software and the media on which it is provided, as well as any related services, come with guarantees that cannot be excluded under the Australian Consumer Law.
For major failures with the service, you are entitled:. You are also entitled to be compensated for any other reasonably foreseeable loss or damage. If the failure does not amount to a major failure, you are entitled to have problems with the Service rectified in a reasonable time and, if this is not done, to cancel your contract and obtain a refund for the unused portion of the contract.
This Agreement is not intended to and does not: i change or exclude any statutory consumer rights that cannot be lawfully changed or excluded; or ii limit or exclude any right you have against the person who sold the Product to you if that person has breached any sales contract with you.
You agree to use the Software in compliance with all applicable laws, including local laws of the country or region in which you live or in which you download or use the Software. To make a claim under this Limited Warranty, return the defective media along with the sales receipt directly to Belkin at the address indicated below, or you can contact the Belkin Support Team in your area as indicated below.
This Limited Warranty is void if failure of the media has resulted from accident, abuse, or misapplication. Any replacement media will be warranted for the remainder of the original Warranty Period or thirty 30 days, whichever is longer. In relation to consumers who are entitled to the benefit of the CGA, the media on which Software is provided comes with guarantees that cannot be excluded under New Zealand law, and this Limited Warranty is in addition to any statutory rights such consumers may have under New Zealand law.
This Limited Warranty does not apply in Australia. Consumers in Australia have statutory rights in relation to the Software and media on which the Software is provided under the Australian Consumer Law.
To the extent warranties cannot be disclaimed or excluded, they are limited to the duration of the Warranty Period indicated above. It is your responsibility to back up your system, including without limitation, any material, information or data that you may use or possess in connection with the Product or Software, and Belkin shall have no liability for your failure to back up your system or any material, information or data. Some Belkin Products and Software may monitor energy consumption in the home.
Belkin does not guarantee or promise any specific level of energy savings or other monetary benefit from the use of the Products or Software or any other feature. From time to time, Belkin may use the Software to provide you with information that is unique to you and your energy usage and suggests an opportunity to save money on energy bills if you adopt suggestions or features of the Product or Software.
You acknowledge that this information is not a guarantee of actual savings, and you agree not to seek monetary or other remedies from Belkin if your savings differs. We cannot guarantee that it is correct or up to date.
In cases where it is critical, accessing information through the Software is not a substitute for direct access of the information in the home. The warranties and remedies set out in this Agreement are exclusive, and, to the extent permitted by law, in lieu of all others oral or written, express or implied.
You agree to strictly comply with all export control laws and regulations and agree not to export, re-export, divert, transfer or disclose any portion of the Software or any related technical information or materials, directly or indirectly, in violation of any applicable export law or regulation. All U. Government users acquire the Software and user documentation with only those rights herein that apply to non-governmental customers.
Use of either the Software or user documentation or both constitutes agreement by the U. If any portion of this Agreement or any of its terms is found to be void or unenforceable by law in a particular jurisdiction, such portion or terms shall be interpreted and enforced to the maximum extent allowed in such jurisdiction, and the remaining provisions or any part thereof will remain in full force and effect.
This Agreement constitutes the entire agreement between Belkin and you with respect to the Software and your use thereof and supersedes any conflicting or additional terms contained in any purchase order or elsewhere. No provision of this Agreement may be waived, modified or superseded except by a written instrument signed and accepted by Belkin and you.
However, the Belkin Privacy Policy referenced herein is subject to change in the manner described in that document. Belkin may provide translations of this Agreement as a convenience to users.
However, in the event of a conflict or inconsistency between the English and any non-English versions, the English version of this Agreement shall govern, to the extent not prohibited by local law in your jurisdiction. Any suppliers of Belkin shall be direct and intended third-party beneficiaries of this Agreement, including without limitation with respect to the disclaimers of warranties and limitations on liability set forth herein.
Other than as set forth in the preceding sentence, a person or entity who is not a party to this Agreement shall not have any right to enforce any term of this Agreement. No failure or delay in exercising any right or remedy shall operate as a waiver of any such or any other right or remedy. The language of this Agreement shall not be construed strictly for or against either party, regardless of who drafted such language or was principally responsible for drafting it.
The rights and obligations under this Agreement are not assignable by you, and any attempted assignment shall be void and without effect. This Agreement shall bind and inure to the benefit of the parties and their successors and permitted assigns. You have the right to opt-out of this mandatory arbitration provision. If you opt-out, you will retain your right to file a lawsuit. If you do not opt-out, you will have agreed to the mandatory arbitration set forth below.
In order to opt out of mandatory arbitration, you must i mail written notification to Belkin International, Inc. In either case, such written notification must include your name, address, and a clear statement that you do not wish to resolve disputes with Belkin through arbitration.
Improve 3G uplink throughput. Update data card serial driver and modify multi-buffer mechanism for uplink throughput. The EVDO uplink throughput is no longer limited to approximately kbps when the network is capable for higher rate.
Update new daylight saving time for US and Canada. The start date for day- light saving time is changed to start at second Sunday in March. Add Modem backup. Enable modem backup feature as option.
The 3G data card can be the backup for the WAN connection. UPnP Security vulnerability. Access Restriction enable in GUI. Access Restriction was not being pro- grammed properly.
0コメント